12
Getting started
Plug the small end of the charger into the
multipurpose jac
k
of the device
,
and plug the large
end of the charger into an electric soc
k
et.
Connecting the charger improperly may
cause serious damage to the device. Any
damage caused by misuse is not covered by
the warranty.
After fully charging
,
disconnect the device from the
charger. First unplug the charger from the device
,
and
then unplug it from the electric soc
k
et.
Do not remove the battery before removing
the charger. This may damage the device.
To save energy
,
unplug the charger when not
in use. The charger does not have a power
switch
,
so you must unplug the charger from
the electric soc
k
et when not in use to avoid
wasting power. The device should remain
close to the electric soc
k
et while charging.
