012
Connecting to a Power Source
SLB-10A rechargeable battery Speci
fi
cation
Model SLB-10A
Type Lithium
lon
Capacity 1050mAh
Voltage 3.7V
Charging time
Approximately 180 Minutes
You should use the rechargeable battery SLB-10A supplied with the
camera. Be sure to charge the battery before using the camera.
Number of images and battery life: Using the SLB-10A
Battery life /
Number of images
Conditions
Still image
Approx. 160 MIN /
Approx. 320 shots
Using the fully charged battery, Auto
mode, 10M image size, Fine image
quality, Shot to shot interval: 30Sec.
Changing the zoom position between
the Wide and the Tele after every shot.
Using the
fl
ash on every second shot.
Using the camera for 5 minutes and
then powering it off for 1 minute.
Movie
Approx. 130 MIN
Using the fully charged battery
640x480 image size
30fps frame rate
Ä
These
fi
gures are measured under Samsung’s standard conditions
and shooting conditions and may vary depending on the user’s
methods.
Important information about battery usage.
When camera is not in use, turn off the power.
Please remove the battery if the camera will not be used
for long periods. Batteries can lose power over time and are
prone to leaking if kept inside the camera.
Low temperatures (below 0°C) can affect the performance of
the battery and you may experience reduced battery life.
Batteries will usually recover at normal temperatures.
During extended use of the camera, the camera body may
become warm. This is perfectly normal.
Connecting the AC adapter with the USB cable can be used as an
AC cable, and you can charge the rechargeable battery with the
AC cable.
- Using an AC cable
: Connect the AC adapter to the USB
cable. It can be used as a power
cable.
- Using a USB cable
: Remove the AC adapter.
You can download stored images
to your PC (p.91) or supply the
power to your camera through the
USB cable.
Summary of Contents for EC-SL420BBP
Page 103: ......
