![background image](http://html.mh-extra.com/html/samsung/eb-pa510/eb-pa510_user-manual_337549250.webp)
Using the battery pack
9
2
After the mobile device is fully charged, disconnect the USB cable from both devices.
•
To stop charging, press and hold the Power button for approximately two seconds.
To resume charging, press the Power button.
•
You can use the battery pack while it is charging but you may not be able to use it
if the battery level is too low.
•
If the mobile device is not charging after being connected to the battery pack,
press the Power button.
•
The battery pack is an auxiliary external battery. It may not fully charge some
mobile devices.
•
If the battery pack is exposed to extremely hot or cold temperatures or an error
occurs, the indicator light will flash. Disconnect the mobile device from the battery
pack, and then reconnect them.
Checking the charging status
The indicator light alerts you to the connected mobile device’s charging status.
Status
Indicator light
Charging
100%
0%
Fully charged
100%
0%
English (USA)
7
Summary of Contents for EB-PA510
Page 1: ...www samsung com User Manual 12 2016 Rev 1 1 Battery Pack EB PA510 EB PA710 ...
Page 262: ...入门指南 3 设备部位图 电源 电池电量键 指示灯 充电器插口 USB 充电器 插口 手带 简体中文 3 ...
Page 265: ...6 使用电池组 为移动设备充电 1 将 USB 数据线的一端连接至电池组的 USB 充电端口 然后 将 USB 数据线 的另一端插入至移动设备的多功能插口 充电开始 简体中文 6 ...
Page 272: ...開始使用 3 裝置部位圖 電源鍵 電池電量按鈕 指示燈 充電埠 USB 傳輸線充 電埠 握帶 繁體中文 台灣 3 ...