English
25
Installation
To the sides
If the countertop is made of granite, marble, or any other material that can be damaged
by drilling, follow this.
1.
Put a large towel into the bottom of the
dishwasher(covering the filter) to prevent
wood shavings or a dropped screw from
falling into the sump.
2.
Insert the provided brackets into the
side front holes of the dishwasher as
shown.
If the brackets are too long, cut them
down using pliers.
3.
Pre-drill one hole into both sides of the
kitchen cabinet.
Make sure the hole is smaller than the
diameter of the screw.
4.
Tighten the provided screws.
5.
Assemble the provided plastic caps as
shown.
CAUTION
• After installing the dishwasher inside
the cabinet, check if the door opens and
closes freely with no interruption with
the cabinet.
• If the plastic caps are not assembled,
water may leak and cause a fire or
electric shock.
DW9900R_DD68-00208B-00_EN.indd 25
12/29/2018 1:57:44 PM
