English
28
Oper
ations
Operations
06
Sanitize /
(Control Lock)
With the
Sanitize
option selected, the water temperature is
increased to 163 ˚F (73 ˚C) in the final rinse cycle for high
temperature sanitization.
If you select the
Sanitize
option, the "Sanitize" lamp blinks
when the water temperature reaches the sanitary temperature
(over 155 ˚F (68 ˚C)), and then remains illuminated until the
Sanitize
option ends.
When you open the door or press the
POWER
button, the
"Sanitize" lamp turns off.
NOTE
The
Normal
cycle with the
Sanitize
option selected is NSF
Certified and operates in accordance with NSF/ANSI Standard
184 for Residential Dishwashers. Certified residential
dishwashers are not intended for licensed food establishments.
Your dishwasher is NSF Certified.
Control Lock
allows you to lock the buttons on the control
panel so children cannot accidently start the dishwasher by
pressing the buttons on the panel.
To lock and unlock the buttons on the control panel, hold the
Sanitize
button down for three (3) seconds when the power
is On.
07
Display
Displays information about the current cycle including the
cycle time, remaining time, Delay Start settings, and other
cycle-specific information.
If a problem occurs during operation, an information code
appears with a warning sound. Refer to the information codes
on page
47
.
08
Delay Start
Delay a cycle for up to 24 hours in one-hour increments.
To increase the delay start time, press or hold the
Delay Start
button. The hour displayed indicates the time at which the
wash will start.
- After setting the delay time, press the
START
button, and
then close the door to start the cycle.
- To change the delay time after the dishwasher has started,
first turn the dishwasher off and turn it back on. Then,
select a new cycle and change the delay time settings.
DW8000R_DD68-00211A-00_EN.indd 28
2019-04-24 5:59:18