English
43
Tr
ouble
shoo
ting
Problem
Possible cause
Solution
There are
food particles
remaining on
dishes.
(Not cleaning
properly.)
There is no rinse aid.
• Check the dispenser and add rinse
aid.
• Use liquid type rinse aid.
A nozzle is clogged.
• Clean the nozzle. See page
.
The dishes are
improperly loaded.
Too many dishes have
been loaded.
• Rearrange the dishes so they do not
interfere with nozzle rotation and
detergent dispenser operation.
• Load only an appropriate number of
dishes.
• Load your dishes as recommended.
• Load the heavily soiled items into the
Storm Wash area. (See page
)
The filters are clogged or
not correctly fastened.
(Food soils remain on the
filter.)
• Scrape food from dishes prior to
loading. (Do not pre-rinse.)
• Clean the filter. (See page
• Make sure the filters are correctly
fastened.
Less water than required
is supplied.
• Check if the supplied water pressure
is between 20 and 120 psi (between
140 and 830 kPa).
Leaves glasses
with a light flm.
The water supplied is soft
and too much detergent
was used.
• Underload the dishwasher and use a
rinse aid to minimize this.
Aluminum dishes were
included in the wash
load.
• Remove the marks on the dishes
using a low sensitivity cleaner.
Leaves a yellow
or brown flm on
the inside of the
dishwasher.
This is caused by coffee
and tea soils.
• Remove the soils using a spot cleaner.
• Use a cycle with a higher
temperature.
DW8000R_DD68-00211A-00_EN.indd 43
2019-04-24 5:59:20
Summary of Contents for DW80R706 Series
Page 1: ...Dishwasher User manual DW80R706 Series DW8000R_DD68 00211A 00_EN indd 1 2019 04 24 5 59 10 ...
Page 54: ...Memo DW8000R_DD68 00211A 00_EN indd 54 2019 04 24 5 59 20 ...
Page 55: ...Memo DW8000R_DD68 00211A 00_EN indd 55 2019 04 24 5 59 20 ...
Page 111: ...Notas DW8000R_DD68 00211A 00_MES indd 55 2019 04 24 6 00 45 ...