English - 7
CONTROL PANEL
When you press the
Power
button, the entire display turns on and off, and
then the light of the most recently f inished cycle lights up.
When the selected cycle is complete, the dishwasher powers off
automatically.
Select the appropriate wash cycle depending on the soil level of your
dishes. After you select a cycle, the Cycle On light for that cycle lights up.
The temperature rises to 15
°
F
(70
°
C
) in the f inal rinse cycle for high
temperature sanitization.
If you select the
Sanitize
option, the “Sanitize” lamp blinks when the water
temperature reaches the sanitary temperature (over 156
°
F
(69
°
C
)), and
then remains illuminated until the
Sanitize
option ends. When you press the
Power button, the “Sanitize” lamp turns off.
The
Normal
Cycle with the
Sanitize
option selected is NSF certified.
The
Sanitize
feature operates in accordance with NSF/ANSI Standard
184 for Residential Dishwashers. Certified residential dishwashers are
not intended for licensed food establishments.
02 setting up your dishwasher
1
2
3
4
5
1
Power
2
Cycle Selector
4
Sanitize
3
Hi-Temp Wash
Raises the main wash temperature to improve cleaning for loads containing
tough, baked-on food.
Hi-Temp Wash
is not available for the
cycle.
Express 60
5
Heated Dry
When the “Heated Dry” function is selected, the heater will work during the
drying process.
Control Lock allows you to lock the buttons on the control panel so children
cannot accidently start the dishwasher by pressing the buttons on the
panel.
To lock and unlock
the buttons on the control panel, hold the Heated Dry
button down for three (3) seconds when power is On.
6
Delay Start
Delay a cycle for 3, 6 or 9 hour
. The hour displayed
indicates the time at which the dishwasher will start.
If a proble occurs during an operation,
(Control Lock)
/
m
specific LEDS blink, indicating
the cause of the problem. The blinking is accompanied by a warning
tone. For more information, refer to "Information Codes" on page 26.
8
6
7
s
