English - 9
6
Delay Start
Delay a cycle for up to 24 hours in one-hour increments. To increase the delay
start time, press or hold the
Delay Start
button. The hour displayed indicates
the time at which the wash will start.
-
After setting the delay time, press the
START
button, and then close the
door to start the cycle.
-
If you want to change the delay time once the dishwasher has started,
press the
Cancel
button and turn off the dishwasher. Then, turn on the
dishwasher again and select a new cycle with a new delay setting.
7
START
To start a cycle, press the
START
button before closing the door.
*
Cancel
: To cancel a currently running cycle and drain the dishwasher, press
and hold the
START
button for three (3) seconds.
Once the dishwasher is reset, select a cycle and option, and then press
START
to restart the dishwasher.
You can select options (
Hi-Temp Wash
,
Sanitize
) before starting a cycle. If you change the cycle after
selecting an option, the original cycle is reset.
To prevent the touchpad from losing response sensitivity, follow these instructions:
-
Touch the center of each keypad using one fi nger. Do not push.
-
Clean the touch control’s surface regularly with a soft, damp cloth.
-
Be careful not to touch more than one touch key pad at a time, except as directed.
When you pause a cycle by opening the door during operation, press the
START
button before closing
the door to continue the cycle.
Push door fi rmly closed within 3 seconds of pressing
START
button.
If the door is not closed within 3 seconds, the cycle will not start.
O O X
using your dishwasher
DW80M3021_DD81-02549A-00_EN.indd 9
DW80M3021_DD81-02549A-00_EN.indd 9
2017-08-02 2:42:43
2017-08-02 2:42:43
