Se
tting up y
our dish
w
asher
DW60R2014AP
01
02
03
04
05
06
07
08
09
10
01
POWER
When you press the
POWER
button, the entire display turns on and
off. When the selected cycle is complete, the dishwasher powers
off automatically.
02
Cycles
Select the appropriate wash cycle depending on the soil level of
your dishes.
03
Half Load
For small loads, use either the upper or lower rack only to save
energy. Press the
Half Load
button to select the upper or lower
basket.
04
Sanitize
The temperature rises to 158 ˚F (70 ˚C) in the final rinse cycle for
high temperature sanitization. If you select the
Sanitize
option,
the “
Sanitize
” lamp blinks when the water temperature reaches
the sanitary temperature [over 156 ˚F (69 ˚C)], and then remains
illuminated until the
Sanitize
option ends. When you press the
POWER
button, the “
Sanitize
” lamp turns off.
NOTE
• The
Normal
cycle with the
Sanitize
option selected is
NSF
certified.
• The
Sanitize
feature operates in accordance with
NSF/ANSI
Standard 184
for residential diShwashers. Certified residential
dishwashers are not intended for licensed food establishments.
05
Hi-Temp Wash
Raises the main wash temperature to improve cleaning for loads
containing tough, baked-on food.
NOTE
Hi-Temp Wash
is not available for the
Express 60
cycle.
06
Control Lock
(3sec)
Control Lock lets you lock the buttons on the control panel so
children cannot accidentally start the dishwasher. To activate
Control Lock, hold the
Control Lock
button down for three (3)
seconds. To de-activate Control Lock, hold the
Control Lock
button
down for three (3) seconds again.
07
Indicator
Rinse refill
• If the “Rinse refill” indicator is lit, it means the dishwasher is
low on dishwasher rinse aid and requires a refill.
Delay start
• If the “Delay start” indicator is lit, it means, you selected the
“
Delay Start
” option.
English
14
Setting up your dishwasher
DW60R2014(A5)_IB_DD81-02706A-00_EN.indd 14
12/24/2018 12:15:58 PM
