English - 30
INFORMATION CODES
The Control Panel displays information codes to help you understand what is occurring with your
dishwasher.
CODE
SOLUTION
OC
Over-level water check
• Functional check. Close the water supply valve and go to your house circuit
breaker panel, set the dishwasher’s circuit breaker switch to off , and then contact
an authorized Samsung service centre.
LC
Leakage check
• If a water supply valve connection leak occurs, close the water supply valve and
go to your house circuit breaker panel, set the dishwasher’s circuit breaker switch
to off , and then contact the installer to fi x.
If the problem continues, contact an authorized Samsung service centre.
4C
Water supply check
• Check if the water supply valve is closed, the water supply is suspended, or the
water inlet valve or line is frozen or clogged by foreign particles.
If the problem continues, close the water supply valve, and then contact an
authorized Samsung service centre.
5C
Drain check
• After closing the water supply valve, check whether the drain hose is clogged
or folded. Also, check whether drain hole inside sump is clogged. If the problem
continues, contact an authorized Samsung service centre.
HC
High temperature heating check
• Functional check. With the dishwasher empty, add detergent, and then run a
cycle.
If the problem continues, go to your house circuit breaker panel, set the
dishwasher’s circuit breaker switch to off , and then contact an authorized
Samsung service centre.
3C
Pump operation check
• Functional check. Turn off the dishwasher and start it again.
If the problem continues, contact an authorized Samsung service centre.
For any codes not listed above, refer to the back of this manual and contact your Samsung Customer
Service centre.
Troubleshooting and
information codes
User Manual_DW9000H-Series-00159A-02_EN (Australia)_141229.indd 30
User Manual_DW9000H-Series-00159A-02_EN (Australia)_141229.indd 30
2014-12-29 12:20:09
2014-12-29 12:20:09
