English
60
Maint
enanc
e
Maintenance
Nozzles
To prevent the nozzles from being clogged or if the nozzles are clogged, remove and clean
each nozzle. Use caution when removing the nozzles as they may break.
Upper nozzle
1.
Open the door, and then pull out the
upper rack to reveal the upper nozzle.
2.
Loosen and remove the nut, and then
remove the nozzle.
3.
Unclog and clean the nozzle.
4.
Reinsert the nozzle, and then tighten the
nut by hand.
5.
Rotate the nozzle by hand to make sure
the nozzle is engaged correctly.
Lower nozzle
1.
Open the door, and then pull out the
lower rack. The lower nozzle is visible
on the bottom.
2.
Unclog and clean the nozzle.
3.
Reinsert the nozzle.
4.
Rotate the nozzle by hand to make sure
the nozzle is engaged correctly.
DW7500RM_DD81-02968A-01_EN.indd 60
2019-10-23 10:41:26
Summary of Contents for DW6 R707 Series
Page 74: ...Notizen DW7500RM_DD81 02968A 01_DE indd 74 2019 10 23 10 40 59 ...
Page 75: ...Notizen DW7500RM_DD81 02968A 01_DE indd 75 2019 10 23 10 40 59 ...
Page 150: ...Memo DW7500RM_DD81 02968A 01_EN indd 74 2019 10 23 10 41 31 ...
Page 151: ...Memo DW7500RM_DD81 02968A 01_EN indd 75 2019 10 23 10 41 31 ...