English
37
Oper
ations
Salt storage
The water softener is designed to remove minerals and salts from the water, which would
have a detrimental or adverse effect on the operation of the appliance. The higher the
content of these minerals and salts, the harder your water is. The softener should be
adjusted according to the hardness of the water in your area.
Your local Water Authority can advise you on the hardness of the water in your area.
Adjusting salt consumption
The dishwasher is designed to allow for adjusting the amount of salt consumed based on
the hardness of the water used. This is intended to optimise and customise the level of salt
consumption so that the salt consumption could be set proceed as follows:
1.
Turn the dishwasher on.
2.
Press and hold the
Program
button for five seconds within 60 seconds from turning on
the dishwasher.
- When you entered the Setting mode, the display will show “0:00”.
3.
Press the
Delay Start
button to select the water hardness level setting menu.
- The display shows the current setting. (Default setting: “H3”)
4.
Press the
Program
button to change the setting.
- You can select from H1 – H6 (soft – hard).
5.
Wait 5 seconds to save the setting.
NOTE
• It is recommended that adjustments should be made in accordance with the following
(or Manual) table.
• The manufactory setting: H3 (EN50242)
DW4000RM_DD81-03019B-00_EN.indd 37
9/4/2020 11:22:42 AM
Summary of Contents for DW50R4070F Series
Page 54: ...Memo DW4000RM_DD81 03019B 00_EN indd 54 9 4 2020 11 22 45 AM ...
Page 55: ...Memo DW4000RM_DD81 03019B 00_EN indd 55 9 4 2020 11 22 45 AM ...
Page 110: ...Notatka DW4000RM_DD81 03019B 00_PL indd 54 9 4 2020 11 51 34 AM ...
Page 111: ...Notatka DW4000RM_DD81 03019B 00_PL indd 55 9 4 2020 11 51 34 AM ...