English
30
Be
for
e y
ou s
tar
t
Before you start
Salt storage
CAUTION
• Use dishwasher-specific salt only. Do not use any other type of salt or solvent. This may
damage the salt storage and the water softening system.
• To prevent corrosion due to an excessive amount of salt or salty water, always fill the
salt storage immediately before a washing cycle gets started.
Filling the salt storage
1.
Open the door.
2.
Turn the cap counterclockwise to open.
3.
Fill the salt storage with water (only
required when using the dishwasher for
the first time).
4.
Apply dishwasher salt.
CAUTION
• The maximum capacity is about 1 kg. Do
not exceed the capacity.
• Exceeding the capacity may affect the
dishwasher performance.
5.
Turn the cap clockwise to close.
NOTE
• To clean salt or salt water from
dishwasher, run the Quick cycle.
• Depending on the size of the salt grains,
it may take a while for the salt to
dissolve and the indicator (
) to turn
off.
Salt indicator
The indicator (
) turns on if there is not enough salt for the next several cycles.
DW4000RM_DD81-03019B-00_EN.indd 30
9/4/2020 11:22:40 AM
Summary of Contents for DW50R4040F Series
Page 54: ...Memo DW4000RM_DD81 03019B 00_EN indd 54 9 4 2020 11 22 45 AM ...
Page 55: ...Memo DW4000RM_DD81 03019B 00_EN indd 55 9 4 2020 11 22 45 AM ...
Page 110: ...Notatka DW4000RM_DD81 03019B 00_PL indd 54 9 4 2020 11 51 34 AM ...
Page 111: ...Notatka DW4000RM_DD81 03019B 00_PL indd 55 9 4 2020 11 51 34 AM ...
