Operation Instruction
_7
02 OPERA
TION INS
TRUC
TION
Operation instruction
Control panel
DW50K4030FS/FW
1
5
9
4
8
2
6
7
3
1
POWER
Press this button to turn on your dishwasher : the screen lights up.
2
Program
To select washing program press this button.
3
Half load
To select
Half load
function. (With this
Half load
function you can only use it
when you have only about or less than 5 place setting dishware, and you will
see less water and energy consumption. It can only be used with all program
except Pre Wash.)
4
Delay start
Press this button to set the delayed hours for washing. You can delay the
start of washing up to
24
hours. One press on this button delays the start of
washing by one hours.
5
Display
Running indicator, delay time, error codes and etc.
6
Rinse Add
To select
Rinse Add
function, you can use it when you want to add once
rinse after the program. It can be used with all program expect Pre Wash.
7
Hygiene
Push the
Hygiene
button for the best possible hygiene in your dishwasher.
At the final rinse it heat up to 67 °C and hold this temperature for a several
minutes. This function is available with all program except Pre Wash.
8
Multi tab
(Control lock)
To select
Multi in 1
option which needs salt and rinse aid but a
Multi in 1
tablet. This option can be used with all program except Pre Wash. Another
option allows you to lock the buttons on the control panel so children cannot
accidentally start the dishwasher by pressing the buttons on the panel. To
lock and unlock the buttons on the control panel, hold down both the
Multi in 1
button for (3) seconds.
9
START (Reset)
In power on condition, close the dishwasher door and select the cycle and
desired options. Press the
START
button to begin the cycle.
When you want to pause the dishwasher while running, press the
START
button and make sure to open the door slowly and carefully.
You can reset the machine by pressing the
START
button for 3 seconds
during washing. After reset, the dishwasher goes to the initial state except salt
consumption setting of water softener.
• When the door is open only the
POWER
button will operate.
• You can select options (
Multi in 1
,
Delay start
,
Half load
,
Hygiene
and
Rinse Add
) before
starting a cycle.
DW4000KM-00000A-00_EN (Basic)_160323.indd 7
DW4000KM-00000A-00_EN (Basic)_160323.indd 7
2016-03-23 1:14:27
2016-03-23 1:14:27