manualshive.com logo in svg

Samsung DW50H4050 Series, Repair Manual

Share
Download
Samsung DW50H4050 Series Repair Manual Download Page 22

22 _ Standard Disassembly Drawings

2-9. BASKET MIDDLE / ASSY ADJUSTER / BRACKET ADJUSTER

- Basket Middle :  DD82-01729* / SVC ASSY-BASKET MIDDLE (DW50R4060**/DW50R4050**/DW50R4040**) 

DD82-01714B / SVC ASSY-BASKET MIDDLE (DW50R4070**)

- Assy Adjuster :  DD82-01719A, DD82-01720A / SVC ASSY-ADJUSTER-L, R (DW50R4070**/DW50R4060**)
- Bracket Adjuster :  DD82-01717A, DD82-01718A / SVC ASSY-BRACKET ADJUSTER-LEFT, RIGHT  

(DW50R4070**/DW50R4060**)

Part

Figure

Description

BASKET 

MIDDLE / ASSY 

ADJUSTER 

/ BRACKET 

ADJUSTER

[DISASSEMBLY] 

1.  Open the dishwasher’s DOOR, and take off the 

BASKET MIDDLE.

  

NOTE

 :  

Please refer to the section of ‘ASSY ROTOR 

MIDDLE’ for disassembly of rotor middle.

Bracket Adjuster

Adjuster

2.  Release 4 hooks of ASSY ADJUSTER (at each 

side) to release them from the BASKET MIDDLE.

  

Warning

 

Do not this work without safety gloves. It can cause 

injury from sharp edge.

  

Caution

 

Be careful not to break the hooks.

[ASSEMBLY]

1.  Assemble the BASKET MIDDLE with ADJUSTER 

and BRACKET ADJUSTER together.

  

Warning

 

Do not this work without safety gloves. It can cause 

injury from sharp edge.

  

Caution

 

Be careful not to break the hooks.

  

NOTE

 :  

ASSY ADJUSTER and BRACKET ADJUSETER are 

the parts for DW50R4070** and DW50R4060** models. 

DW50R4050** and DW50R4040** models use Rollers. 

- Roller : DD82-01667A / SVC ASSY-ROLLER-MID.

Summary of Contents for DW50H4050 Series






























Reviews:

No comments

Brands by name

Popular brands

Load more brands