Installation
Installation
English
28
• A strain relief must be used. Do not loosen the nuts already installed on the terminal
block. Be sure they are tight. Use a
3
/
8
” (1 cm) deep well socket.
• Since january 1, 1996, The national electric code requires that new wiring (not existing)
utilize a 4-wire connection to this dryer.
STEP 4
Level the dryer
To ensure optimal performance, the dryer must be level.
A
B
1.
Using a
level (A)
, check if the dryer
is level side to side and then front to
back. If the dryer is not level, adjust the
leveling feet (B)
at the bottom of the
dryer. Then, check if the dryer is level
again.
A
B
NOTE
• To set the dryer to the same height
as your washer, fully
retract (A)
the leveling feet by turning them
counterclockwise, then
loosen (B)
the
feet by turning them clockwise. Once
the dryer is the same height as the
washer, follow the directions above
to level the dryer.
• Adjust the leveling feet only as much
as necessary to level the dryer.
Extending the leveling feet more
than necessary can cause the dryer
to vibrate.
DC68-03784N-05_IB_DV3200T_EN_R.indd 28
DC68-03784N-05_IB_DV3200T_EN_R.indd 28
2023-06-29 4:42:58
2023-06-29 4:42:58
