Connecting DVD Recorder-VCR to the TV using the SCART Cable
Connecting DVD Recorder-VCR to a Satellite Receiver or Other Equipment
You can connect your DVD Recorder-VCR to a Satellite receiver or
other DVD Recorder-VCR using the SCART cable if the appropriate
outputs are available on the equipment chosen. The following illustra-
tions give a few examples of the connection possibilities.
AV1(EURO AV): By means of 21-pin Scart
Cable
Plug the SCART Cable with satellite receiver or other equipment
into the AV1 (EURO AV) socket on the rear of the DVD Recorder-
VCR. After making this connection, select the source by pressing
the INPUT SEL. button for the AV1 input sources.
By means of RF Cable
After making this connection, you must preset the station
received through the satellite tuner. RF output channel of the
satellite receiver should be adjusted away from channel 60,
which is used by the DVD Recorder-VCR, e.g. re-adjust to
channel 65.
AV2 IN: By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or other equipment
into the AV2 (DEC./EXT.) socket on the rear of the DVD
Recorder-VCR. After making this connection, select the source
by pressing the INPUT SEL. button for the AV2 input sources.
By means of RF Cable
After making this connection, you must preset the
station received through the satellite tuner. RF output channel
of the satellite receiver should be adjusted away from channel
60, which is used by the DVD Recorder-VCR, e.g. re-adjust to
channel 65.
2
ANT
TV
RF cable
Aerial Connector
Satellite Receiver or other
Equipment
DIGITAL AUDIO OUT
OPTICAL
COAXIAL
R
R
L
VIDEO
L
1
2
AUDIO OUT
ANT
TV
DIGITAL AUDIO OUT
OPTICAL
COAXIAL
R
R
L
VIDEO
L
SCART Cable
RF cable
Aerial
1
2
AUDIO OUT
ANT
TV
Satellite Receiver or other
Equipment
RF cable
SCART
Cable
Aerial Connector
DIGITAL AUDIO OUT
OPTICAL
COAXIAL
R
R
L
VIDEO
L
1
2
AUDIO OUT
You can connect your DVD Recorder-VCR to the television
using the SCART cable if the appropriate input is available on
the television. You thus:
●
Obtain better quality sound and pictures
●
Simplify the setting up procedure of your DVD Recorder-
VCR
●
Regardless of the type of connection chosen, you must
always connect the RF cable supplied. Otherwise, no
picture will be visible on the screen when the DVD
Recorder-VCR is switched off.
●
Make sure that both the television and the DVD Recorder-
VCR are switched off before connecting the cables.
Connect the RF cable as indicated in the previous
previous section.
Connect one end of the SCART cable to the AV1
(EURO AV) socket on the rear of the DVD Recorder-VCR.
Plug the other end into the appropriate connector on the
television.
