Samsung DVD-V9800M Instruction Manual Download Page 15

Page: 15 / 88

ENG-

O N N E C T I O N S

●

HDMI (High Definition Multimedia Interface)

HDMI is an interface that enables the digital transmission of video and audio data with just a single cable.

Using HDMI, the DVD player transmits a digital video and audio signal and displays a vivid picture on
a TV having an HDMI input jack.

●

HDMI connection description

HDMI consists of uncompressed video and digital audio data (LPCM or Bit Stream).

- The player outputs only a pure digital signal to the TV through HDMI.
- If TV does not support HDCP (High-bandwidth Digital Content Protection), snow noise appears on the

screen.

●

Why does Samsung use HDMI?

HDMI provides an interface between any compatible digital audio/video source, such as a set-top box, a

DVD player, a PC, a video game system, or an AV receiver and a compatible digital audio and/or video
monitor, such as a digital television (DTV).

HDMI supports any TV or PC video format with digital high-definition pictures.

00000X_V9800_XAA_Eng1 2/22/08 3:57 PM Page 15

Summary of Contents for DVD-V9800M

























































































Search results

Summary of Contents for DVD-V9800M

Reviews:

Samsung DVD-V9800M, Instruction Manual, Page: 15 / 88

Search results

Summary of Contents for DVD-V9800M

Reviews: