Samsung DVD-V85K Service Manual Download Page 72

Page: 72 / 112

Samsung Electronics

10-1

10. Schematic Diagrams

Block Identification of Main PCB - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-2

10-1 S.M.P.S. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-3

10-2 Power Drive - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-4

10-3 Function-Timer (Karaoke Models Only) - - - - - - - - - - - - - - - - - - - - - - - - - 10-5

10-4 Function-Timer (DVD-V52 Only) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-6

10-5 System Control/Servo- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-7

10-6 A/V - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-8

10-7 Hi-Fi/MTS (Option)- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-9

10-8 Input-Output - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-10

10-9 A2/NICAM (DVD-V85K/V72K Only) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-11

10-10 OSD/VPS/PDC - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-12

10-11 TM (DVD-V85K/V72K Only) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-13

10-12 KARAOKE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-14

10-13 DVD Main-Micom/AV Decoder - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-15

10-14 DVD Servo - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-16

10-15 DVD Audio/Video - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-17

For schematic Diagram
- Resistors are in ohms, 1/8W unless otherwise noted.

Note

Special note :

Most semiconductor devices are electrostatically sensitive and therefore require the special handling techniques described under the
“electrostatically sensitive (ES) devices” section of this service manual.

Note :

Do not use the part number shown on this drawing for ordering. The correct part number is shown in the parts list (may be slightly

different or amended since this drawing was prepared).

Important safety notices :

Components identified with the mark have the special characteristics for safety. When replacing any of these components.
Use only the same type.

VCR Main PCB

DVD Main PCB

Summary of Contents for DVD-V85K

















































































































Search results

Summary of Contents for DVD-V85K

Reviews:

Related manuals for DVD-V85K

Brands by name

Popular brands

Samsung DVD-V85K, Service Manual

Search results

Summary of Contents for DVD-V85K

Reviews:

Related manuals for DVD-V85K

Brands by name

Popular brands