Samsung DVD-V5600, User Manual

Page: 25 / 232

English
-
25
Using the Assemble Edit Function
This function allows you to start a new recording
at a specific position on the cassette while main-
taining a very smooth scene change.
1
Insert the cassette to be edited in your
DVD-VCR.
2
Press the
‹
ll button to start playback.
3
When you reach the position from which you
wish to start the new recording,
press the
‹
ll button.
4
Press the F.ADV/STEP button as often as
necessary to advance frame by frame, until
the exact recording position is located.
5
While the DVD-VCR is in still mode, hold
down the
REC (
●
) button for a while to acti-
vate the assemble edit function. The mode is
changed to pause.
6
Select the source from which you wish to
record by pressing:
• The
PROG or button for television
channels.
• The INPUT SEL. button for the AV1,AV2
or AUX.
7
Press the
‹
ll button to start recording.
If you want to finish the recording, press the
■
button.
Recording from Another VCR or
Camcorder
You can copy a cassette to your DVD-VCR from
another video source, such as another VCR or a
Camcorder etc.
• It is an infringement of copyright laws to copy
prerecorded cassettes or to re-record them in
any form without the permission of the owners
of the corresponding copyright.
1
Connect the output jack of your external
devices to the SCART input connector or AUX
on the front or rear of the DVD-VCR.
2
Insert a blank cassette in your DVD-VCR.
3
Insert the pre-recorded cassette in the other
video source (VCR or Camcorder etc).
4
Press the INPUT SEL. button to select the
appropriate input on your DVD-VCR:
• AV1, AV2 for the SCART input.
• AUX for the RCA input.
5
Start playing back the cassette to be copied.
6
Hold down the REC (
●
) button for a while to
start recording on your DVD-VCR.
7
When you have finished recording, press the
■
button on both VCR and DVD-VCR.
• If you wish to view the cassette being
copied, your DVD-VCR must be connected
as usual to the television (Refer to page 9
for further details).