Samsung DVD-SR150M, Service Manual

Page: 68 / 120

Trouble Shooting
4-46 Samsung Electronics
Fig. 4-14
* If you can't see the message above, try to use other new disc instead of current one.
Generally, this caused by disc quality and by disc creating problem.
4) Press the OK button on the remote control (Fig. 4-15).
Fig. 4-16
5) It takes about 1~2 minutes to finish a update.
The message on the screen will be displayed after finishing a update and the tray will be opened automatically.
And then do not turn off the unit until it goes off automatically.
Fig. 4-17
6) After removing the update disc, turn off the unit with power button.
Finally, the Drive Firmware update is ended.
Atfer checking old and new version, select “Yes” or “No”
with “ ” or “ ” on the remote control.
* The Version is indicated by “XX.X modelname”
You can see "LOAD" on Front Display.
1) Press OPEN/CLOSE to open the disc tray.
2) Insert the update CD-R disc, label facing up.
3) Press OPEN/CLOSE to close the disc tray.
* It takes about 1~2 minutes to show below message.
Fig. 4-15 Remote Control
Drive Update
Do you want to update drive-firmware?
Version: A23E.SR150/EUR
-> A23E.SR150
Yes No
Drive Update
Now, processing...
Please, do not turn off the power.
Drive Update
Drive firmware is successfully
updated.