Samsung DVD-S1000 User Manual Download Page 2

Precautions

Precautions

2

3

Ensure that the mains supply in your house complies with that indicated on the identification sticker

located at the back of your play. Install  your player horizontally, on a suitable base (furniture), 

with enough space around it for ventilation (7~10cm). Make sure the ventilation slots are not covered. 

Do not stack other, or heavy devices on top of the player. Do not place the player on amplifiers or other

equipment which may become hot. Before moving the player ensure the disc tray is empty.    

This player is designed for continuous use. Switching off the DVD player to the stand-by mode does 

not disconnect the electricity supply In order to separate the player completely from the mains,it has 

to be disconnected by unplugging the main plug, especially when left   unused for a long period of time.   

1. Setting up  

Protect the player from moisture (dripping or splashing and objects filled with liquids), and excess heat

(e.g.fireplace) or equipment creating strong magnetic or electric fields (i.e.speakers...). Disconnect the power

cable from the mains electricity supply if the player malfunctions. Your player is not intended for industrial

use but  for domestic purposes only. Use of this product is for personal use only. If your player or disc has

been stored in a cold atmosphere for example during transportation in the winter, wait for approximately 2

hours until they have reached room temperature, before use.

2. Caution 

Never open the player or any of its components. It can be dangerous for you or certain fragile components.

You could receive an electric shock or touch the laser beam. Do not place your eyes close to the opening of

the disc tray or any other opening to look inside the player.

3. For your safety

Be careful handle your discs with care. Hold a disc with finger on the border or hole. Always place disc

with the label facing upward (in case of a single side disc ). Always use a soft cloth to clean disc if

necessary, wipe from the centre to the border. Always put disc back into their cases after playing and store

in vertical position. Always place the disc properly into the tray using the proper guide area. Never use

record cleaning sprays, benzine, static electricity liquids or any other solvent, if the disc surface is dirty.

Wipe gently with a soft damp (water only) cloth, never wipe the disc in a circular motion, since circular

scratches are likely to occur and could cause noise during playback.

4. Disc   

The battery used in this product contains chemicals that are harmful to the environment.   

Do not dispose of batteries in the general household waster. It is recommended that the replacement 

of the battery should be done by a technician. 

5. Battery   

For safety reasons, be sure to disconnect the AC power cord from the AC outlet.

• Do not use benzene, thinner, or other solvents for cleaning.

• Wipe the cabinet with a soft cloth.

6. Maintenance of cabinet 

1

2

3

4

5

DVD-S1000/00102B-1  8/9/02 10:46 AM  Page 2

Summary of Contents for DVD-S1000





















Reviews: