48
DVD-R3000
Advanced operations
Timer recording
To check programs
Press [PROG/CHECK].
The timer recording list appears.
Icon explanations
W
The times overlap those in another program.
This program is currently recording.
F
The disc was full or the maximum number of programs or scenes
was reached so the program failed to record.
The material was copy-guarded so the material failed to record.
X
The program failed to record for some other reason.
■
To change the program
➡
page 47
■
To exit the timer recording list
Press [PROG/CHECK] or [RETURN]. (The television is shown.)
For your reference
Programs that failed to record are displayed gray. These
programs are deleted from the list at 4 a.m. the day after
tomorrow.
Releasing the unit from timer
standby
■
To release the unit from recording standby
B
If you want to record something else before the program start time,
for example:
Press [
, POWER].
The unit turns on and “
” goes out.
●
Be sure to press [
, POWER] before the program start time to put
the unit on timer recording standby. The program only works if “
”
is on.
■
To put the unit on timer recording standby
C
Press [
, POWER].
The unit turns off and “
” lights on the unit’s display.
Note
“
” flashes when the unit couldn’t go to timer recording standby
(e.g., a disc isn’t loaded, a disc that can’t be recorded to is loaded, or
the disc is protected). Check the disc carefully.
■
To stop recording while a program is working
D
Press [
, POWER], then [
■
, STOP] within
5 seconds.
Recording stops. Recording standby is also canceled if there are
other timer recording programs, so be sure to press [
, POWER] to
put the unit on timer recording standby.
TOP
!?
!?
A
rqt6035_p040-049.p65
02.2.26, 5:58 PM
48
