12
Connection to an FM Antenna
1
Using the audio cables, connect the
AUDIO (red and
white) OUT
terminals of 5.1 CH (Front L-R)on the rear of
the DVD player to the
AUDIO (red and white) IN
termi-
nals of the Amplifier.
2
Using the video signal cable(s), connect the
VIDEO
or
COMPONENT OUT
terminals on the rear of the DVD play-
er to the
VIDEO
or
COMPONENT IN
terminal of your TV.
3
Turn on the DVD player, TV, and Amplifier.
4
Press the input select button of the Amplifier to select
exter-
nal input
in order to hear sound from the DVD player.
Note
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 27 to 29)
- The position of terminals can vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
RED
WHITE
RED
WHITE
Audio Cable
2-channel amplifier
Connection to an Audio System (2 Channel Amplifier)
1
Connect the FM antenna supplied to the FM Antenna
Jack.
2
Slowly move the antenna wire around until you find
a location where reception is good, then fasten it
to a wall or other rigid surface.
Note
- This unit does not receive AM broadcasts.
FM Antenna
(Included)