Samsung DVD-CM420 Service Manual Download

Page: 49 / 66

Samsung Electronics

6-1

6. Schematic Diagrams

◆

Block Identification of Main PCB- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

6-1 S.M.P.S.-1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

6-2 S.M.P.S.-2 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

6-3 Function-Timer - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

6-4 Volume - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

6-5 Power Drive - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

6-6 Logic - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

6-7 A/V - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

6-8 Hi-Fi/MTS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

6-9 TM - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

6-10 AM/FM Receiver - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

6-11 Input-Output - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

6-12 DVD Micom- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

6-13 DVD AV Decoder - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

6-14 DVD Servo - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

6-15 DVD Audio/Video Interface - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

6-16 Digital Amp- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

6-2

6-3

6-4

6-5

6-6

6-7

6-8

6-9

6-10

6-11

6-12

6-13

6-14

6-15

6-16

6-17

6-18

VCR Main PCB

DVD Main PCB

For schematic Diagram
- Resistors are in ohms, 1/8W unless otherwise noted.

Note

Special note :

Most semiconductor devices are electrostatically sensitive and therefore require the special handling techniques described under the
“electrostatically sensitive (ES) devices” section of this service manual.

Note :

Do not use the part number shown on this drawing for ordering. The correct part number is shown in the parts list (may be slightly

different or amended since this drawing was prepared).

Important safety notices :

Components identified with the mark have the special characteristics for safety. When replacing any of these components.
Use only the same type.

All manuals and user guides at all-guides.com

Summary of Contents for DVD-CM420



































































Search results

Summary of Contents for DVD-CM420

Reviews:

Related manuals for DVD-CM420

Brands by name

Popular brands

Samsung DVD-CM420, Service Manual

Search results

Summary of Contents for DVD-CM420

Reviews:

Related manuals for DVD-CM420

Brands by name

Popular brands