manualshive.com logo in svg

Samsung DVD-511, Service Manual, Page: 64 / 115

Share
Download
Samsung DVD-511 Service Manual Download Page 64

Circuit Descriptions

Samsung Electronics

5-19

5-7-2 DVD Audio Output

1) Compressed Data

The audio data inputted to ZIC1 (ZiVA4.1) A/V decoder is divided into compressed data and uncompressed data.
It is compressed data that is compressed with multi-channel audio data such as Dolby digital, MPEG, DTS, etc.
The compressed data inputted to ZIC1 (ZiVA4.1) is converted into the uncompressed data of 2, 4, and 6 channels
through ZiVA4.1 built-in audio decoder and is outputted to Data 0, 1, 2, and 3 through digital audio interface.  
The compressed data is transmitted to external AC-3 amplifier or MPEG/DTS amplifier as IEC-958/1937 trans-
mission data format compressed by ZiVA4.1 built-in IEC-958 output process.

2) Uncompressed Data

The uncompressed data is that data isn’t compressed, so it is called CD-DA, LPCM data. 
The 2 channels data is converted through audio decoder 2-channel data and Data 0 and Data 1 are outputted in
digital audio interface.Via IEC-958 output process, they is transmitted to digital amplifier or AC-3/MPEG/DTS
amplifier built in the external digital input source with IEC-958/1937 transmission format.  

AUDIO INPUT

BUFFER

AUDIO OUTPUT

BUFFER

RECEIVER 

or 

DECODER

(IEC-958/1937)

AUDIO

DAC

HOST or DVD/CD

INTERFACE

IEC-958/1937

OUTPUT PROCESS

IEC-958/1937

INTERFACE

AUDIO DECODER

(MPEG, DOLBY DIGITAL,

CD-DA, LPCM

DIGITAL AUDIO

INTERFACE

2-, 4, or 6-

CHANNEL OUTPUT

PROCESS

Uncompressed 16- or 24-bit

LPCM camples at
fs=44.1,48,96KHz

2-Channel LPCM, Decoder
Dolby Digital, Decoded MPEG

Compressed Data
(MPEG, Dolby Digital),
CD-DA, LPCM

ZIC2, 3 (LOCAL DRAM)

ZIC1 (ZiVA4.1 ; A/V DECODER)

Source Data Types :

MPEG-1,-2, Dolby Digital,

CD-DA, LPCM

Fig. 5-24 Audio Decoder and Output Interface Datapath

Summary of Contents for DVD-511




















































































































Reviews:

No comments