English - 18
INSTALLATION STACKING
In case of purchasing the additional stacking kit, contact our Samsung service center or local
distributers. [Part no. SK-DH / SK-DA / SKK-DF]
The stacking kit diff ers depending on the model.
Only use the product in 1 hour after installing the stacking kit by tilting the product so that the product
can run after the oil in the compressor becomes stable.
1.
Carefully lay the dryer on its side. Use the packing material so
you don’t scratch the fi nish on the dryer.
2.
Install rubber pads to dryer base.
• Locate the 4 rubber pads in the parts package. Insert the
rubber pads into the holes at the bottom of the levelling legs.
• Purchase the stacking-kit package additionally.
3.
Set the dryer upright.
The stacking kit can only be installed for Samsung family
products.
4.
Install bracket to dryer.
• Remove washer top cap screw from the rear left. Align left
bracket holes with top cap screw hole on rear left of the unit
and replace screw.
Leave screw loose so dryer hole alignment will be easier.
• Repeat the above step with the right side.
CAUTION
installing your dryer
Bracket-Stacking
Screw
DV90H8000HW-03407J-03_EN.indd Sec3:18
DV90H8000HW-03407J-03_EN.indd Sec3:18
2/19/2016 3:23:01 PM
2/19/2016 3:23:01 PM
