installing your dryer
_23
DOOR REVERSAL
1.
Unplug the power cord.
2.
Remove the two hinge
screws from the door.
3.
Remove the door by
lifting it.
11.
Turn the Holder-Glass
upside down and remove
the 8 screws.
4.
Remove the two screws from
the lever-holder and then remove
the screw on the opposite side
from the lever-holder.
5.
Assemble the lever-holder using
the screws that were removed
from the lever-holder-in Step
4 and then fasten the screws
marked by the circle in the figure
to the opposite side from the
lever-holder.
12.
Remove 2 Support-
Hinges and the Hinge-
Door
6.
Remove the two screws
from the Frame-Front.
7.
Fasten the screw into the
hole on the other side.
13.
Remove the screw, insert
the removed screw into
the bottom hole, and then
fasten it.
8.
Remove the 2 Cushion-
Cover(F)s from the
bottom.
14.
Assemble the Support-
Hinges and the Hinge-
Door that you removed in
Step 12.
15.
Fasten the 8 screws that
you removed in Step 11.
9.
Remove the 15 screws.
16.
Install 2 Guide-Holder
Glasses onto the other
side.
10.
Remove the Holder-Glass.
17.
Assemble the Holder-Glass
by sliding it so that the
upper hook is caught and
fasten the 15 screws that
you removed in Step 9.
01 installing your dryer
DV5471AE-03022A-03_EN.indd Sec3:23
DV5471AE-03022A-03_EN.indd Sec3:23
2011-07-25
6:03:19
2011-07-25
6:03:19
