operating Instructions, tips
_25
Digital Graphic
Display
The display window shows the estimated time remaining in the cycle and the
chosen cycle after the Start/Pause button is pressed. The estimated time
remaining may fluctuate as the cycle progresses.
The “DRYING” and the chosen cycle will be showed by turn in the display until
the cycle is complete.
When your dryer is in the cool-down phase, the “COOLING” will be showed.
When the cycle is complete, “END” appears in the display panel until the dryer
door is opened, the Power, Close or Start button is pressed or about 5 minutes
have passed.
If your dryer is paused during a cycle, the display doesn’t change showing the
chosen cycle and remaining time until the Start/Pause button is pressed.
Dry Level
Selection Button
To select the dry level in the Normal, Heavy Duty, or other Sensor Dry cycles,
press the Dry Level button. An indicator light will illuminate next to the desired
dryness level.
Press the button repeatedly to scroll through the settings. Larger or bulkier loads
may require the Very Dry or More Dry setting for complete dryness.
The Less Dry setting is best suited for lightweight fabrics or for leaving some
moisture in the clothing at the end of the cycle. Damp Dry is designed to partially
dry items. Use for items that lay flat or hang to dry.
Temp Selection
Button
To select the correct temperature for the load, press the Temp button. An indicator
light will illuminate next to the desired temperature. Press the button repeatedly to
scroll through the settings.
High
– For sturdy cottons or those labeled Tumble Dry.
Medium
– For permanent press, synthetics, lightweight cottons, or items labeled
Tumble Dry Medium.
Med Low
– For lower heat than Medium to dry synthetic or washable knit fabrics.
Low
– For heat sensitive items labeled Tumble Dry Low or Tumble Dry Warm.
Extra Low
– Provides the lowest heated dry temperature possible.
Time Selection
Button
When using Manual Dry cycles, time can be adjusted by pressing the time
selection button.
During the Sensory Dry cycle, the time light indicator is off because exact drying
times are determined by fluctuating humidity levels.
Signal Selection
Button
When the cycle is complete, a chime will sound.
When the Wrinkle Prevent option is selected, the chime will sound intermittently.
Adjust the volume of the chime or turn it off by pressing the Signal button.
Press the button repeatedly to scroll through the choices.
Delay Start
Button
Any cycle can be delayed for up to 24 hours in one-hour increments. Displayed
hour indicates the time at which the wash will be started
02 operating Instructions, tips
6
4
3
2
5
7
DV520AE-02836A-01_EN.indd 25
2010-08-24 ¿ÀÈÄ 3:29:40
