4
Continuous Run Mode
How to enter:
-
Press Mixed Load Bell +Dry Level(DV431) or Wrinkle P Time(DV231) for 7 sec during
Power On State (normal user mode).
-
Once in Continuous Run Mode, display “CC” for 1 sec and the remaining time for 2 sec in
turns.
-
The previous cycle will restart during Continuous Run Mode until the mode is deactivated.
-
During Continuous Run Mode, press Mixed Load Bell +Dry Level(DV431) or Wrinkle P
Time(DV231) for 7 seconds to go back to normal user mode.
Data Display Mode (DV431 only)
How to Enter:
-
With Power On, press AdjustUp Key + AdjsutDown Key for 7 seconds until it sends out a
beeping sound .
-
If not pressed any keys for 5 minutes, it will be set back from Data Display Mode
-
If pressing AdjustUp Key in this mode ,Display Mode ID will be incresed.
-
If pressing AdjustDown Key in this mode ,Display Mode ID will be decresed.
Definition of Software Version Mode:
-
Display Mode 0 : Temperature data
-
Display Mode 1 : Average Touch Sensor data for 1 minute
-
Display Mode 2 : Average Temperature data for 1 minute
ALIGNMENT AND ADJUSTMENTS
WARNING
To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before
servicing, unless testing requires power.
Power On state
(Normal user mode)
Mixed Load Bell +Dry Level(DV431) or
Wrinkle P Time(DV231) 7 SEC
Continuous Run Mode
(Technical)DV431AEP-02365D-02.indd 4
2011-07-08 �� 5:35:57
