GB-15
GB-14
D
i
g
i
t
a
l
T
e
r
r
e
s
t
r
i
a
l
R
e
c
e
i
v
e
r
GB
6. Program Information
EPG-Electronic Program Guide
The electronic program guide gives you a channel list for the
channels.
N
No
otte
e
:
1. This service depends on service provider.
2. After receiver recognized the GMT-time from the signal
which takes few seconds, it can display correct EPG
information.
●
Press the
EPG
key while you are viewing a program.
This function is displayed on the screen by using only time.
●
RED
key
: Red key is for moving back to the previous date.
●
GREEN
key : Green key is for moving to the next coming date.
●
i
key
: This key is used to watch the program information, if there is more information
than one page. Use the
CH+/CH-
keys to move up and down pages.
●
/
key
: Use to display the program list by 30 minutes per block.
Time interval can be adjusted by press keys as followings on EPG screen:
1 Key:
1 hour and 30 minutes
2 key:
30 minutes
3 key:
15 minutes
●
Select the channel by pressing the
/
keys and press the
OK
key to watch this channel.
BASIC FUNCTIONS
OPERATING THE RECEIVER
Main Menu
After installing your antenna system and STB with appropriate connectors.
●
Plug in the AC main power and switch on the receiver.
●
Press the
MENU
key to bring up the main menu.
The following on screen display will appear:
The sub menu topics will be displayed.
For the sub-menus Installation, Channel Organization and
Parental Lock, you need the PIN Code.
1. Installation
This menu consists of 4 sub-menus:
Select Country, Auto Scanning, Manual Scanning and
Reset to Factory Defaults.
●
Select “
Installation
” in the main menu mode to select
the sub menu.
●
Enter the
PIN
Code.
If you have not entered your own
PIN
Code then the
PIN
Code
0000
applies, which was set at the factory.
MF68-00345A(REV1.2)_GB 4/18/05 1:27 PM Page 14
