DSR 3800, DSR 3700
8
D
I
G
I
T
A
L
S
A
T
E
L
L
I
T
E
R
E
C
E
I
V
E
R
DSR 3800, DSR 3700
9
DESCRIPTION
DESCRIPTION
1. AC MAINS
This is to plug in the AC mains power cord.
The input AC voltage range is 120V, 60Hz supply.
2. DISH INPUT
This port is to connect the coaxial cable from LNB of your dish.
The IF input is provided through this port and the input frequency
range is 950-2150 MHz. Also the voltage switching 13V and
18V is passed through this port.
3. LOOP
To enable the connection of an Analog receiver,
The receiver is provided with this ‘LOOP’ port.
4. 0/12V OUT
This is used to connect to an external LNB switch.
5. RS 232 DATA PORT
This is used to connect your receiver to a computer for reading
and loading data information. (only for service)
6. AV OUT
These RCA connectors are used to connect any external
video and audio.
7. S-VIDEO OUT
This is used to connect STB to your TV by using S-VHS cable.
8. ANT.IN
This is used to connect your local RF channels to
your TV through Loop.
9. RF OUT
This is used to connect to your TV via RF cable.
(Preset to channel 3)
Rear Panel
Front Panel
1.
This key is used to turn the receiver on and off (Standby).
2. ,
These keys are used to change the channels.
3. ,
These keys are used to increase and decrease the volume level
manually.
4. 7 Segment Display
This LED display will show the current channel number.
While the receiver is in Standby mode, the display will
show the current time.
5. CAM Slot
Slot for Common Interface.(DSR 3800 only)
6. Infrared Sensor
This is to receive the IR commands from the Remote
Control Unit.
7. Not Used
1
8
7
6
5
4
3
2
1
2
3
6
4
5
7
9
DSR3800_3700_6.28 7/8/02 11:59 AM Page 8
