background image

4.19

AUTO ANSWER

When an 616 station is set into this mode, all intercom calls will automatically turn
on the speaker and microphone for true hands-free answering. Each 616 keyset
user may select either this mode or ring mode.

AUTOMATIC HOLD

Station users can enable or disable automatic hold at their keysets. While a user is
engaged on an outside (C.O.) call, pressing another trunk key, route key or CALL
button automatically puts the call on hold when this feature is enabled. Pressing
the transfer key, conference key, page key or a DSS key will always automatically
place the call on hold. This type of automatic hold is not a user-selectable option.

AUTOMATIC PRIVACY

All conversations on outside lines and intercom calls are automatically private. The
privacy feature can be turned off on a per-line basis.

BACKGROUND MUSIC

When a customer-provided music source is connected, each keyset user may lis-
ten to background music. The HOLD button turns BGM on or off and the volume is
controlled by the volume control keys. The music interface is located in the KSU.

BUSY LAMP FIELD (BLF)

DSS/BLF keys are assigned by default to all keysets. These buttons will be off
when the station is idle, light red when that station is in use and flash distinctively
when that station is in the DND mode.

BUSY STATION CALLBACK

When reaching a busy station, callers may request a callback by pressing one
button or dialing a code. The system rings the caller back when that station be-
comes idle (a system-wide maximum of 100 callbacks are allowed at one time
including busy station and busy trunk).

CALL FORWARDING

Station users can forward internal and outside calls to other destinations immedi-
ately (Forward All), when busy (Forward Busy) or if not answered in a program-
mable number of seconds (Forward No Answer). These forward destinations can
all be different. Once a destination has been programmed, it can be turned on and
off with a programmable key. Forward All takes priority over Busy and No Answer
conditions.

In addition to the three usual methods of forwarding described above, a fourth
option called Follow Me is available. This option allows a station user to set a For-
ward All condition from his/her station to another station while at the remote station.

Summary of Contents for DS 616



















































Reviews: