Samsung DS-5021D User Manual Download Page 58

Page: 58 / 140

ANNEX

APPLICA

ION MENUS

CONVENIENT

FEA

URES

BASIC FEA

URES

ING

YOU SHOULD

KNOW

PREP

ARA

ION

Automatic Redial / Retry

When you make an outside call and receive a busy signal, the OfficeServ system can automatically
redial the number for you. It will automatically redial at a pre-programmed interval for up to 99
attempts.

When you hear a busy signal, press the

[RETRY]

button or press the Soft button corresponding to
[RETRY] on the LCD screen.

The system will reserve the line and automatically

redial the same number for you. You will hear the
call progress tones through the speaker. At this time,
the microphone is muted.

When the called party answers, you must pick up

the handset or press the

[Speaker]

or [Send] button

before you begin speaking.
You must answer within 10 seconds.

- If you make another call, auto-redial is cancelled.

- To cancel a retry, lift and replace the handset.

NOTE

Summary of Contents for DS-5021D













































































































































Search results

Summary of Contents for DS-5021D

Reviews:

Related manuals for DS-5021D

Brands by name

Popular brands

Samsung DS-5021D, User Manual

Search results

Summary of Contents for DS-5021D

Reviews:

Related manuals for DS-5021D

Brands by name

Popular brands