Samsung DS 24D, User Instruction

Page: 28 / 131

BUSY STATION CALLBACK
When you call another station and receive a busy signal:
• Press the CBK key or dial 44 .
• When the busy station becomes free, your keyset will ring.
• Lift the handset or press SPEAKER to call the now idle station.
NOTES:
1.
A callback will be canceled if not answered within 30 seconds. If you
have set a callback, your
CBK key will light.
2. If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press the
SPEAKER key before dialing.
BUSY STATION CAMP-ON
When you call another station and receive a busy signal but you do not want
to wait for a callback:
• Press the CAMP key or dial 45 .
• The called station will receive off-hook ring tone repeated every few sec-
onds and its first available
CALL button will flash green to indicate your
call is waiting.
• Wait for the called party to answer.
• The called station must release its first call or place it on hold before
answering your camp-on.
NOTES:
1.
If you receive No More Calls tone, that station has no available key to
accept your call. Hang up or leave a message.
2. If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press the
SPEAKER key before dialing.
CALLING YOUR SYSTEM OPERATOR
• Dial 0 to call your system operator or group of operators.
• If you want to call a specific operator, dial that person’s extension num-
ber.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press the
SPEAKER key before you begin dialing.
9 8
INTERCOM CALLS
CALLING OTHER STATIONS
• Dial the extension number or group number.
• Wait for the party to answer. If you hear a brief tone burst instead of ring-
back tone, the station you called is set for Voice Announce or Auto
Answer. Begin speaking immediately after the tone.
• Finish the call by replacing the handset or pressing the SPEAKER key.
NOTES:
1.
If you have a DSS key assigned to an extension or station group, you
may press this key instead of dialing the number.
2. If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press the
SPEAKER key before you begin dialing.
ANSWERING INTERCOM CALLS
• When your keyset rings, simply lift the handset— OR —press the
SPEAKER key to be connected to the calling station.
• Finish the call by replacing the handset or pressing the SPEAKER key.
See Ring Preference under Customizing Your Keyset .
VOICE ANNOUNCE MODE
(INTERCOM CALLS ONLY)
When another station calls you, your keyset will sound a brief attention tone
and you will hear the caller’s announcement.
• Press SPEAKER to turn on the microphone and speak handsfree—
OR — lift the handset to reply.
• To finish the call, replace the handset or press the SPEAKER key.
AUTO ANSWER MODE
(INTERCOM CALLS ONLY)
When another station calls you, your keyset will sound a brief attention tone
and then automatically answer the call.
• Your microphone and speaker are turned on and you can speak hands-
free. For privacy, use the handset.
• To finish the call, replace the handset or press the SPEAKER key.
Home Page
DS 24D
Table of Contents