preparing the dishwasher enclosure
_5
01 PREP
ARING THE DISHW
ASHER
preparing the dishwasher
enclosure
PRODUCT DIMENSIONS
CUTOUT DIMENSIONS
This dishwasher is designed to be enclosed
on the top and on both sides by a standard
residential kitchen cabinet unit.
The installation enclosure must be clean and free
of any obstructions.
The enclosure must be at least 24 inches wide,
24 inches deep, and 34 1/8 inches high.
For the front door of the dishwasher to be fl ush
with the leading edge of the counter top, the
counter top must be at least 25 inches deep.
Side view
(DMR78 series/
DMR77 series)
Side view
(DMR57 series/
DMT300 series)
Rear view
27” (686 mm)
20 ½
” (520 mm)
24 ½
” (622 mm)
25” (635mm)
23
7
⁄
8
” (606 mm)
33 ¾
” (857 mm)
20 ½
” (520 mm)
24 ½
” (622 mm)
2 ½
” (64 mm)
1 ¾
” (44 mm)
2” (50 mm)
The water supply
line, power cable and
drain hose should
go through this
space behind the
dishwasher. Then,
they run in channels
under the dishwasher
to connections in the
front.
24” (610 mm)
minimum
24” (610 mm)
minimum
34 ¹⁄
8
” (867 mm)
minimum
DMR77LH_DMR57LH-00027A_EN_v1.indd Sec5:5
DMR77LH_DMR57LH-00027A_EN_v1.indd Sec5:5
2011-04-05
2:17:04
2011-04-05
2:17:04
