installing your dishwasher
_13
LEVELING YOUR DISHWASHER
Dishwasher must be level for proper dish rack operation and wash performance.
1.
Place level on door and rack track inside the tub as
shown to check that the dishwasher is level.
2.
Level the dishwasher by adjusting the four leveling
legs individually.
A : To adjust the height of a front leg, rotate it
using the wrench.
B : To adjust the height of a rear leg, turn the
screw-bolt to the left to raise the back of the
dishwasher.
The maximum adjustment height of the feet is
20 mm.
START OF DISHWASHER
The followings should be checked before starting the dishwasher.
1.
Whether the dishwasher is level and fi xed.
2.
Whether the inlet valve is opened.
3.
Whether there is no leakage at the connections of the conducts.
4.
Whether the wires are tightly connected.
5.
Whether the power is switched on.
6.
Whether the inlet and drain hoses are not knotted.
7.
All packing materials and printings should be taken out from the dishwasher.
ATTENTION
: After installation, please put this manual into the bags of printings. The content of this
manual is very helpful to the users.
02 installing your dishwasher
Check Level
Check Level
Front to Back
Front to Back
Check Level
Check Level
side to side
side to side
A
A
B
B
DD81-01306A-01_EN.indd Sec4:13
DD81-01306A-01_EN.indd Sec4:13
2012-09-27 10:53:03
2012-09-27 10:53:03
