《
72
》
Software Notes
About the software
System Requirements
Please ensure that you read the instruction manual carefully before use.
•
The attached software is a camera driver and image editing software tool for
Windows.
•
Under no circumstances should all or part of either the software or the user
manual be reproduced.
•
Copyrights for software are licensed only for use with a camera.
•
In the unlikely event of a manufacturing fault, we will repair or exchange your
camera.
We cannot, however, be held responsible in any way for damage caused by
inappropriate use.
•
Using a Hand-made PC or a PC and OS that has not been guaranteed by the
manufacturer is not covered by the Samsung warranty.
•
Before reading this manual, you should have a basic knowledge of computers
and O/S (Operating Systems).
After inserting the CD-ROM provided with this camera into the CD-ROM drive, the
following window should automatically run.
Before connecting the camera to the PC, you
should first install the camera driver.
For Windows
For Macintosh
Windows 98/ 98SE/ 2000/ ME/ XP
Mac OS 10.0 - 10.3
Minimum 64MB RAM (XP : 128MB)
Minimum 64MB RAM
200MB of available hard disk space
110MB of available hard-disk space
USB port (1GB recommended)
USB port
USB port
CD-ROM drive
CD-ROM drive
PC with processor better than Pentium II 450MHz
(Pentium 700MHz recommended)
1024x768 pixels, 16bit color display
compatible monitor
(24bit color display recommended)
For playing back a movie clip
Mac OS 10.1 or later
MPlayer, VCL Media Player
Power Mac G4 or later
■
Camera driver : This enables images to transfer between the camera
and PC.
This camera uses the USB Storage Driver as the camera driver. You can use
the camera as a USB card reader. After installing the driver and connecting this
camera to the PC, you can find [Removable Disk] in [Windows Explorer] or [My
computer]. A USB Storage Driver is provided only for Windows. A USB Driver
for MAC is not included with the Application CD. You can use the camera with
Mac OS 10.0 - 10.3.
■
Digimax Master : This is the all-in-one multi media software solution.
You can download, view, edit and save your digital images and movie clips clip
with this software. This software is only compatible with Windows.
■
Digimax Reader : Text recognition program.
You can save an image file that was captured in the TEXT mode as a text file
with this program. This software is only compatible with Windows.
