Samsung DIGIMAX L70, User Manual

Page: 55 / 78

《
54
》
[ Formatting a memory ]
■
This is used for formatting the memory. If you run [Format] on the memory, all
images, including the protected images, will be deleted. Be sure to download
important images to your PC before formatting the memory.
●
Sub menus
[No] : The memory will not be formatted.
[Yes] : A [Processing!] message appears and the
memory will be formatted. If you run
FORMAT in Play mode, a [No Image!]
message will appear.
Be sure to run [Format] on the following types of memory card.
- A new memory card, or an unformatted memory card
- A memory card that has a file this camera can't recognise or one that has been
taken from another camera.
- Always format the memory card using this camera. If you insert a memory card
that has been formatted using other cameras, memory card readers, or PCs,
you will get a [Card Error!] message.
Setup menu
[ Selecting Video out type ]
■
The Movie output signal from the camera can be NTSC or PAL. Your choice of
output will be governed by the type of device (monitor or TV, etc.) to which the
camera is connected. PAL mode can support only BDGHI.
■
Connecting to an external monitor
- Connect the camera to an external monitor with the
supplied AV cable.
[ Start up image ]
■
You can select the image that is first displayed on the LCD monitor whenever
the camera is turned on.
Format
Video Out
USB
Reset
No
Yes
Set:MENU Exit:M
◀
Format
Video Out
USB
Reset
NTSC
PAL
Set:MENU Exit:M
◀
Sound Volume
Shutter Sound
Beep Sound
Start Sound
Start Image
Set:MENU Exit:M
◀
◀
◀
●
Start up image : [Off], [LOGO], [User Image]
- Use a saved image for the start-up image with
the [START IMAGE] in the [RESIZE] menu in the
play mode.
- The start-up image will not be deleted by
[DELETE] or [Format] menu.
- The User images will be deleted by [Reset]
menu.
Yellow - Video
White - sound