168
MagicInfo Lite
10
10 MagicInfo Lite
10.2 Network Schedule
10.2.1
Connecting to a server
To use the
MagicInfo Lite Server
, the clock on the monitor must be set through the server (web).
To use local schedules and
AutoPlay
only, without using the
MagicInfo Lite Server
, the clock must be
set using the remote control.
Network setup
To run
MagicInfo Lite
, connect to a network.
Refer to 130 page for details about the
Network Settings
menu.
Server setup
Go to
MENU
Network
MagicInfo Lite Settings
Server
. Next, enter the server information.
(E.g.: http://192.168.0.10:7001/MagicInfo/)
Configuring the FTP mode and default storage space
Default Storage
: Specify the location you want to save content (downloaded from the server) to.
Internal Memory
: Save the content to the internal memory of the product.
USB
memory: Save the content to USB memory.
If a network schedule is running when USB memory is not connected, the default content will run.
MagicInfo Lite
Server
Server Address
Port
Access Periodically
192.168.0.10
7001
Apply
Cancel
