background image

14

REMOVING THE FREEZER ACCESSORIES

Do not use excessive force when 
removing the cover. It may cause an
injury.

Glass Shelf

Pull the shelf out as far as 
it goes. Then lift it up and
remove it.

Door Bin

Hold the door bin with both
hands and then lift it up.

Drawer

Remove the drawer by
pulling it out and slightly lift-
ing it up.

Ice Maker Bucket

Remove the bucket by lifting up and pulling out.

Front  Leg Cover

Open the freezer and refriger-
ator doors, remove three
screws and detach the cover.

To reassemble the front leg

cover, put it back to original
position and tighten the three screws.

NOTE

REMOVING THE  REFRIGERATOR ACCESSORIES

Spill Proof Glass Shelf

Pull the shelf out as far as it will go. Then lift it up and gently remove it.

Vegetable & Fruit Drawer

Remove the drawer by holding the handle, pulling the drawer out and lifting it up smoothly.

Remove the optimized humidity control cover by pulling it towards you.

Gallon Door Bin

Hold the bin with both hands and remove it by lifting it up.

Wine Shelf (On Some Models)

It is attached to the cabinet wall. To remove the wine shelf, lift it up in the direction 
of the arrow as shown.

Simply take the shelf out of the tabs.

Foldable Shelf (On Some Models)

NOTE

• Before removing the freezer and refrigerator accessories, please move the stored foods.

NOTE

• It is sometimes difficult to pull down the foldable shelf according to the position of the upper shelf. Then, using the space between the foldable

shelf and the wall of the refrigerator, holding the side of the shelf and rotate it to the original position.

Hold the front side of the shelf, lift up
the bottom, and push it to the back.

[When using the Half shelf]

With the Half pushed, rotate upward the
shelf and push up it to the back.

[When using the Folded shelf]

When you want to use the shelf with the
original position, hold the front side of the
shelf, pull it to the original position.

[When using the Full shelf]

Summary of Contents for DA99-01278C

































Reviews: