Both control levers must be touching the
floor to avoid possible personal injury or
property damage because of tipping.
The refrigerator on an uneven floor may
tilt.
To prevent this, adjust the leg so that it
contacts the floor.
If the right side is lower, perform the same
procedure, but with the right control lever.
It is difficult to remove the cover leg
front from the refrigerator, so we do not
recommend making small adjustments
with the control lever.
Instead, refer to the next page for the best
way to make minor adjustments to the
doors.
CAUTION
CAUTION
MAKING MINOR
ADJUSTMENTS TO THE
DOORS
Remember, a leveled refrigerator is necessary for
getting the doors perfectly even.
If you need help, review the previous section on
leveling the refrigerator.
Adjustment part
Fixed part
The left door is fixed.
To make minor door adjustments, adjust
only the right door.
1. Pull out the flex door (
1
) to reveal the lower
hinge (
2
).
2. Insert the supplied allen wrench (5/32”) (
3
)
into the shaft (
4
) of the lower hinge.
3. Adjust the height by turning the hex wrench
(
3
) clockwise (
DOWN
) or counter clockwise
(
UP
).
When you turn the hex wrench counter-
clockwise (
), the door will move up.
(1)
(2)
(3)
(3)
(4)
English - 24
DA68-03022B (EN)-04.indd 24
14. 6. 23. �� 2:47
