Using the detergent and water softener
_19
02
USING THE DETERGENT AND W
A
TER SOFTENER
Using the detergent and water
softener
WATER SOFTENER MODE (WATER HARDNESS LEVEL SETTING)
The dishwasher is designed to allow for adjusting the amount of salt consumed based on the hardness of
the water used. This is intended to optimise the level of salt consumption. To set the salt consumption,
proceed as below:
1.
Switch on the appliance;
2.
Press the
Pre Wash
button for more than 5 seconds to start the water softener set model within 60
seconds after the appliance was switched on;
• Press
the
Pre Wash
button to select the proper set according to your local environment, the sets
will change in the following sequence: H1
H2
H3
H4
H5
H6; It is recommended that
adjustments should be made in accordance with the following table.
* The manufactory setting: H3 (EN 50242)
3.
Wait for 5 seconds to end the set up model.
WATER HARDNESS
Selector Position
Salt consumption
(gram/cycle)
º dH
º fH
º Clark
mmol/l
0-5
0-9
0-6
0-0.94
H1
0
6-11
10-20
7-14
1.0-2.0
H2
9
12-17
21-30
15-21
2.1-3.0
H3
12
18-22
31-40
22-28
3.1-4.0
H4
20
23-34
41-60
29-42
4.1-6.0
H5
30
35-55
61-98
43-69
6.1-9.8
H6
60
1 dH (German degree) = 0.178 mmol/l
1 Clark (British degree) = 0.143 mmol/l
1 fH (French degree) = 0.1 mmol/l
Contact your local water board for information on the hardness of your water supply.
WATER SOFTENER
The hardness of the water varies from place to place. If hard water is used in the dishwasher, deposits
may form on dishes and utensils. The appliance is equipped with a special softener that uses a salt
specifically designed to eliminate lime and minerals from the water.
[Deposits on utensils]
DW5500M_DD81-02437G-00_EN.indd 19
DW5500M_DD81-02437G-00_EN.indd 19
2017-06-22 2:31:22
2017-06-22 2:31:22
