background image

11

ENG

You can scan the frequency ranges available on your television and
in your country and store all the channels found automatically.

The channels are stored in the order in which they appear in the
frequency bands. It is possible that the automatically allocated
numbers may not correspond to those by which you wish to
identify the channels. If this is the case, refer to “Sorting the Stored
Channels” on page 17.

1

Press the MENU button.

2

Press the 

or 

button to select the “Channel”.

3

Press the 

+

or 

button to select the “Auto store”.

4

Press the 

+

or 

button again.

Result:

The  “Auto store” menu is displayed with the “Country”
selected.

5

Select your country by pressing the 

+

or 

button. The following

countries are available: Belgie - Deutschland - Espania - France -
Italia - Nederland - Schweiz - Sverige - UK - East europe - Others.

6

Press the 

or 

button to select the “Search” and press the 

+

or

button.

Result: The horizontal bar is displayed, and then channels are

stored in an order which reflects their positions in the
frequency range. Finally, the search will end automatically.

7

When searching and storing is complete, the “Sort” menu is
displayed.

For ATS areas, the “Auto sort” menu will appear on
the screen after the searching and storing, and then
the channels will be automatically sorted by name.
The “Sort” menu will not be entered. (see the note on
the bottom of page 12).

To...

Then...

Sort the stored channels

Go to Step of the “Sorting

into the desired numerical order

the Stored Stations” 
procedure on page 17.

Exit the channel store function

Press the MENU button 

without sorting the channels

repeatedly until the menus 
disappear.

Select        Search        Exit

              Auto store

Country   : Others

Search    : -/+

Storing the Channels Automatically

Select        Enter        Exit

                Channel

Auto store

Manual store

Name

Add/Erase

Fine tune

Sort

Select        Adjust        Exit

              Auto store

Country   : Others

Search    : -/+

Exit

P 8 C25 -----
426 MHz               22 %

Select        Adjust        Exit

                 Sort

From       : P 1 -----

To         : P-- -----

Store      : ?

Summary of Contents for CW-28V55V









































Reviews: