Samsung CW-21A113N Service Manual Download Page 63

Page: 63 / 83

Disassembly & Reassembly

12-2

Samsung Electronics

Part Name

Description

Description Photo

Chassis

Holder

①

Separate the Ass'y Holder chassis from the Front Cabinet.

②

Pull the Chassis Holder lifting the fixing clip up.

Notice: Pulling the Chassis Holder by force may damage the

clip or the connector. Pull the Chassis Holder just until the clip
comes off the hole.

①

Separate the Speakers, the Speaker Wire, the D-Coil Master

Wire, and the Remote Control Sensor Cable from the Front
Cabinet and the System Board.

②

Separate the wire from the Wire pressing the at.

Notice: Since there is a clip to connect the Connector Header

in the Wire Connector, pulling it by force may damage the clip or
the connector. Press the clip down completely and pull the con-
nector.

①

Separate theAV and Main Board from the Front Cabinet and

AV Wire, GT-Pin Wire.

②

To separate the Wire, Fixing clip and pressing the Wire.

Pull the chassis while raising the

clip fixing the Front Cabinet and

the Holder Chassis

12-1-2 Disassembling the CRT and Chassis

Summary of Contents for CW-21A113N




















































































Search results

Summary of Contents for CW-21A113N

Reviews:

Related manuals for CW-21A113N

Brands by name

Popular brands

Samsung CW-21A113N, Service Manual

Search results

Summary of Contents for CW-21A113N

Reviews:

Related manuals for CW-21A113N

Brands by name

Popular brands