hob use _
21
HOB
USE
USING THE TOUCH CONTROL SENSORS
To operate the touch control sensors, touch the desired panel with the tip of your
pointed finger until the relevant displays illuminate or go out, or until the desired function
is activated.
Ensure that you are touching only one sensor panel when operating the appliance. If
your finger is too flat on the panel, an adjacent sensor may be actuated as well.
SWITCHING THE APPLIANCE ON
1.
Touch the
Lock control
sensor for approximately 3 seconds.
2.
The appliance is switched on using the
On/Off control
sensor.
Touch the
On/Off control
sensor for 1 second.
The digital displays will show .
After the
On/Off control
sensor has been actuated to switch on
your appliance, a heat setting must be selected within approximately 10
seconds. Otherwise, the appliance will switch itself off for safety reasons.
approx 1 sec.
CTR164NB01_XSA_00340A-EN.indd 21
2011-01-19 4:10:06
