hob use _
27
hob u
SE
waTEr boIlINg
1.
Touch the corresponding cooking zone’s key.
2.
Touch the
Water boiling
sensor.
3.
Set the desired power level which will be used
after water boiling.
After water boiling, the cooking zone will
automatically reduce to this power level and an
acoustic signal sounds.
Use Water boiling fuction only to heat water.
Never leave the hob unattended when in use.
This may result in fire.
This is not available in the Complete Bridge zone.
The amount of water available for each cooking zone is as follows:
Cooking zone
amount of water
160 mm
1 Liter ~ 2 Liters
210 mm
1 Liter ~ 3 Liters
Front or Rear Bridge
1 Liter ~ 3 Liters
Use only water at room temperature.
The boiling temperature and time may differ, depending on the amount of water,
the water temperature and the bottom type of the container.
Do not touch or remove the cookware while the Water boiling function is in
progress.
However, this function may not operate properly when the cooking zone is already
hot.
WARNING
CTN464NC01_XEU_00344A-01_EN-121018.indd 27
2012-10-18 �� 9:40:19
