background image

safety instructions _

9

SAFETY

 INSTRUCTIONS

Small amounts of food require shorter cooking or heating time.

If normal times are allowed they may overheat and burn.

Children should be supervised to ensure that they do not play with the appliance.

Any spillage should be removed from the lid before opening and the hob surface should be 
allowed to cool before closing the lid (Model which has lid only).

Do not stand on top of the appliance or place objects (such as laundry, hob cover, lighted 
candles, lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.
-  This may result in electric shock, fire, problems with the product, or injury.
Do not operate the appliance with wet hands.
-  This may result in electric shock.
Do not spray volatile material such as insecticide onto the surface of the appliance.
-  As well as being harmful to humans, it may also result in electric shock, fire or problems with 

the product.

Do not place the appliance over a fragile object such as a sink or glass object. 
-  This may result in damage to the sink or glass object.
Take care when removing the wrapping from food that has just been taken out of the appliance.
-  If the food is hot, hot steam may be emitted abruptly when removing the wrapping and you 

may burn yourself.

Do not unplug the appliance by pulling at the power cord, always grip plug firmly and pull 
straight out from the outlet.
-  Damage to the cord may cause short-circuit, fire and/or electric shock
Appliances are not intended to be operated by means of an external timer or separate remote-
control system.

Do not stare at the hob elements (Model which was installed halogen lamp only).

After use, switch off the hob element by its control and do not rely on the pan detector (Model 
which was installed pan detector only).

SEVERE WARNING SIGNS FOR CLEANING

Do not clean the appliance by spraying water directly onto it. 
Do not use benzene, thinner or alcohol to clean the appliance.
-  This may result in discoloration, deformation, damage, electric shock or fire.
Before cleaning or performing maintenance, unplug the appliance from the wall socket.
-  Failure to do so may result in electric shock or fire.
For your safety, do not use high-pressure water cleaners or steam jet cleaners.

WARNING

CTN464KB01_XEU_00343A_EN.indd   9

28/02/2011   11:23:16

Summary of Contents for CTN464FB Series





































Reviews: