background image

28

_ cleaning and care

cleaning and care

hob

Cleaning agents must not come into contact with a heated ceramic glass surface: 
All cleaning agents must be removed with adequate amounts of clean water after 
cleaning because they can have a caustic effect when the surface becomes hot. 
Do not use any aggressive cleaners such as grill or oven sprays, scouring pads or 
abrasive pan cleaners.

Clean the ceramic glass surface after each use when it is still warm to the touch. 
This will prevent spillage from becoming burnt onto the surface. Remove scales, 
watermarks, fat drippings and metallic discolouration with the use of a commercially 
available ceramic glass or stainless steel cleaner.

light Soiling

1. 

Wipe the ceramic glass surface with a damp cloth.

2. 

Rub dry with a clean cloth. Remnants of cleaning agent must not be left on 
the surface.

3. 

Thoroughly clean the entire ceramic glass cooking surface once a week with 
a commercially available ceramic glass or stainless steel cleaner.

4. 

Wipe the ceramic glass surface using adequate amounts of clean water and 
rub dry with a clean lint - free cloth.

Stubborn Soiling

1. 

To remove food that has boiled over and stubborn splashes, use a glass 
scraper.

2. 

Place the glass scraper at an angle to the ceramic glass surface.

3. 

Remove soiling by scraping with the blade.

Glass scrapers and ceramic glass cleaners are 
available from specialty retailers.

WArNING

CTN364NC01_XSM-00316A_EN.indd   28

8/7/2553   10:53:33

Summary of Contents for CTN364AC Series





































Reviews: