background image

O

P E R AT I O N

31

1

Press the 

CH

or 

CH

button to tune to the channel
that will be labeled. 

2

Press the 

MENU 

button to dis-

play the menu, then press the

button to select “Channel”.  

Press the 

button.

3

Press the 

button to select

“Labeling”.

Press the

button to begin

labeling. The left-most field will
be highlighted.
(Each label has four fields.
See top paragraph.) 

4

Press the 

or 

button to

select a letter, a number, “*”, or
a blank. (Pressing the 

button

results in this sequence:
A,B,...Z,*, blank,0,1,...9).

Note: You cannot select

“Labeling” in the A/V mode.

5

Press the

√  

button to switch to

the next field, which will be 
highlighted. Select a second 
letter or digit using the 

and 

buttons, as above. Repeat the
process to select the last two
digits.

Press the 

MENU

button to set the label and clear the menus from

the screen.

Labeling the Channels

Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”,

“PBS2”, CNN1”, etc.) A label consists of four fields, where each field is a letter, a num-

ber, “*”, or a blank.  When the DISPLAY button is pressed, the channel label will appear

next to the channel number.

AA68-03173A_00(E)-CHAPTER 3  9/15/03  11:56 AM  Page 31

Summary of Contents for CT-21M7W
























































Reviews: